| Brand Name: | SUNHOUSE |
| MOQ: | 1 |
| Price: | Negotiation |
| Payment Terms: | T/T |
The 40ft expandable container house delivers the largest floor area in the folding container range — enough for a full family home, a multi-room office complex or a commercial unit. It is specified where internal space is the deciding factor and the site can accept a longer, heavier unit.
| Item | Typical Specification |
|---|---|
| Folded size | Length approx. 12 m; width and height comparable to a standard container (confirm per model) |
| Expanded floor area | Approx. 70–76 m² including side sections |
| Layout options | 3–5 rooms, open living and dining, kitchen, one or two bathrooms |
| Frame | Heavy galvanised steel frame designed for the longer span |
| Wall panels | Sandwich panel — EPS, rock wool, glass wool or PU, with thickness to suit climate |
| Floor | Reinforced board with PVC, laminate or tile-effect finish |
| Windows and doors | Aluminium framed glazing; reinforced entrance door; optional sliding doors |
| Electrical | Full distribution and wiring to the destination standard |
| Optional systems | Air conditioning provision, water heater, kitchen units, sanitary ware |
At this size the internal plan can follow a residential logic: entrance hall, open living and dining area, a separate kitchen, two to four bedrooms and one or two bathrooms. For commercial use, the same envelope accommodates reception, open office, meeting rooms and welfare facilities. Internal partitions are non-structural in the finished unit, so the layout can be finalised around furniture rather than the other way round.
Site access decides feasibility. A 40 ft unit needs a route wide enough for the delivery vehicle, a turning area and lifting equipment with adequate reach. Survey the access route before ordering — it is the most common reason a large unit cannot be installed on an otherwise suitable plot.
Approximately 70–76 m² including the expanding side sections, depending on the model and wall thickness. Confirm against the approved drawing.
Three to four bedrooms is typical with a separate living area and kitchen, depending on the layout agreed.
Yes. Offices, clinics, canteens and retail units are common applications. Check local planning requirements for commercial occupancy.
Normally a forklift or crane of adequate capacity and reach. The requirement should be confirmed against the unit weight and site conditions.
Units can be positioned side by side and connected, subject to a joint detail and service design agreed during production.
Send us your site access description and floor plan requirements; we will confirm the layout, transport and installation plan.